Do you work on the subframe of your Chopper yourself? If yes, then this hoop is exactly for you. It is the DIY solution. It is the ideal solution!

1 = approx. 118 mm
2 = approx. 1400 mm
3 = approximately 162 mm

The formats + some extra photos are at the bottom.

• 22 mm diameter (tube)
• Both bends are bent exactly 180 degrees
• Both of a very high quality steel (no stainless steel)
• The wall thickness is 2 mm, so it is strong enough!
• The 22 mm bend has an outside diameter (where it touches the frame) of 162 mm
• We also have all kinds of beautiful seats that want to rest on these turns!