mo.can J1850 signal converter for HD

The mo.can J1850 is a digital adapter for trouble-free connection of our instruments PLUS indicator lights with the standard wiring. No soldering or crimping is required, so the warranty remains intact.

You will receive the specific connectors required to connect to the standard harness of your selected HD model. Simply connect the instrument wires, the indicator lights and the supplied connector to the screw connections of the mo.can J1850. Then plug this side of the connector into the specific connector on your bike and you are good to go. Almost plug & ride, it doesn't get any easier.

The mo.can J1850 is suitable for all HD with TwinCam engine from 2004 with DEUTSCH connectors and the dashboard on the tank (TwinCam). It is also suitable for all HD Sportster models from 2004 with DEUTSCH (XL DEUTSCH) or MOLEX (XL MOLEX) plugs. Furthermore, it can be used for all HD Vrod motorcycles with DEUTSCH (VRSC) plug connectors.

Important! not compatible with models using HD LAN, eg Softail from 2011 and later, Dynas 2012 and later, XL 2014 and later, all Rocker and Dyna models, which have fork bridge instruments.

Characteristics:

Speed
RPM
MIL control indicator (check engine warning)
Turn signal indicator light
Indicator lamp for high beam
Oil pressure indicator light
Fuel reserve indicator light
Controls alarm indicator light
Not available:

ABS indicator light (if equipped)
6. Gear indicator light (if equipped)
Indicator light for battery charge indicator (if equipped)
Fuel gauge (if equipped)

Parts supplied:

mo.can J1850 adapter with a specific connector
32p terminal
2 x M3 mounting screws
32 cable end sleeves
plastic plate for fixing and anchoring the cables
2 zip ties