Lithium-ion batteries from JMT

Fresh, modern design and high-tech for your motorcycle.

Spacer (S)
Battery is equipped with one or more spacers that are glued under the battery with the supplied adhesive strip so that the battery fits exactly into the battery box.

Waterproof (W)
The battery is completely waterproof and will not be damaged if the motorcycle is cleaned with high pressure.

Indicator (I)
All batteries are equipped with a battery status indicator.
Simply press the test button. The red digital display shows the current voltage.
The battery must be charged at the latest when the voltage is below 12.9 V.

Replacing a standard lead-acid battery with a JMT lithium-ion battery can save up to 5 kg in weight without any significant effort.

The following advantages speak in favor of JMT lithium-ion batteries:

•  approx. 1/3 of the weight of a comparable lead-acid battery
•  unbeatable cost/weight saving ratio
•  can be installed in any position as they contain no acid
•  contains no heavy metals
•  balanced discharge/charge of all cells thanks to balancer
•  fast charging with high charging current possible
•  very low self-discharge (max. 5% per month)
•  good performance even at high temperatures up to 60°C
•  safe technology and long service life

Due to their specific properties, lead-acid batteries can only use 30% of their capacity, whereas lithium-ion batteries can use almost 100% of their capacity.

For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting power.
A built-in processor ("balancer") also ensures that all cells are charged evenly.
The dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries with the help of adapters.
The connections are also identical, which is why the battery can be replaced in just a few minutes without any further adjustments.

Please note that only suitable chargers may be used for charging. We recommend JMP chargers.
Please refer to the technical data below for the maximum recommended charging currents.
The use of a charger with a voltage of more than 14.9 V to charge a deeply discharged battery with less than 9.6 V is not permitted.

The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.

Technology
JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium polymer process in their manufacture.
This means that they cannot burst into flames or explode during normal operation.
The technology and manufacturing process ensure the highest safety standards for lithium batteries.

• 12 V maintenance-free lithium-ion battery
• recommended charging current 1.5A
• maximum charging current for fast charging 15A
  
  Comparable in dimensions and connections with:
• YT7B-BS
• YT9B-BS
• YTX7A-BS
• YTX9-BS
• YTR9-BS
• YB9A-A
• YB9-B
• 12N9-4B-1