The M-Wave is the world's first digital flasher relay with fade-in/fade-out effect. Furthermore, it is very compact and load-independent.
Every flasher light model is faded in and out smoothly - even LEDs! Brand new style and looks for your turn signal.

While conventional hard switching flashers - especially LED models - only switch on and off blandly, your m-Wave oscillates in a fascinating wave pattern! Flasher lights in a revolutionary new design - ultra compact and light. Basically just a piece of wire with a tiny candy-sized device. Ideal to draw more attention to all kinds of modded or styled motorbikes and cars.

Dimensions:
Casing (L x W x H): 18 mm x 13 mm x 9.5 mm
Connector cable length: approx. 2 x 50 mm
Weight: approx. 4 g

Attention: If you are looking for a flasher relay with automatic deactivation please refer to our m-Stop series!

Notes
a) The M-Wave substitutes a conventional flasher relay. This flasher relay is usually implemented BEFORE the indicator switch.
The most convenient way to mount the M-Wave is to simply locate and replace the original relay.

b) The M-Wave can NOT replace the push-button controls of a push-button instrument. Please refer to our m-Relay+ if you are looking for a flasher relay for push-buttons.

c) Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM). These modules can NOT be replaced or complemented by the M-Wave.

All advantages summarized

• unique fade-in/fade-out effect
• ultra compact and light - in essence just a piece of cable attached to a tiny, candy-sized device ¬†
• ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
• the wiring can be placed into the handlebar or frame tubes or into the wiring harness
• almost load independent (min. 1 Watt)
• completely implemented using digital semiconductor technology. microprocessor controlled No mechanical workings, no spools, no electric contacts
• constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights, as well as all 10-watts and 21-watts turn signal lights
• e. g. works with 4 turn signal lights or 2 handlebar end turn signal lights
• immediate loss-free and brighter illumination of all turn signal lights
• utterly hassle-free connection using only two cables - just connect in series
• completely watertight and vibration resistant because of the moulded-in construction
• short circuit proof, automatic overload protection, switches power up to 100 W.
• no heat generation while operating
• only 5 - 18 V operating voltage required
• also applicable for 6 V turn signal lights
• quality 'made in Germany' - by Motogadget