Kraus Straight Riser Set 200MM Rise

8" (200mm) rise with 1" (25mm)/ 8" (200mm) rise with 1-1/8" (28mm) handle bar clamping area.

Installing these isolated risers with the included billet bushings allows them to be solidly fastened to the top triple tree. This results in a significantly more stiff bar arrangement that makes it possible to use your bike's suspension and brakes much more effectively and to get better control. The rubber bushings that absorb vibrations have been moved to directly beneath the handlebar. They are positioned inside the midsection of the riser there. The quantity of undesired movement at the bushings is significantly decreased by the exclusive application of these rubber isolators. You will feel much more confident in your bike's handling as a result of the much more substantial bar feel. The hard-mounted riser legs and the repositioned rubber isolators make a noticeable improvement immediately.

Specifications:

• Build: CNC-machined aluminium structure
• Colour: Black Anodization

Much better bar feel and far less vibration than rigid installed risers. - CNC-machined billet aluminum with a black anodization The bottom clamp features an aperture to allow for concealed wiring. The usual OEM H-D fitting is 3.5" center to center. Reduction in maintenance and an improvement in bushing life - A wire hole in the riser body's center makes installation simple and wiring tidy.

Notes:

• If you purchase the 984604 RG Billet Gauge Bezel or 984618 Softail Digital Gauge Bezel with your risers, then you will need to add the mount separately (either 984606 Kraus T-Bar Clamp or 984620 Isolated Top Gauge Mount and the 984605 3" Extension for maximum adjustability).
• Kraus Isolated Risers are are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: The 5" version for the Kickback option (= Kickback risers without legs) is NOT compatible with the Kraus Raptor or T-Rex Pullback Plates on bagger applications.
• Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Compatibility: 84-23 H-D (excl. 2023 CVO Road Glide or CVO Street Glide)